The 6 Bolt Performance Wheel is a glue on wheel with a 2.2" bead size, is 1.5" wide, and is designed to be used with Vanquish Products SLW hubs.
The Axial Trail Ready plastic hubs (from the Wraiths) also fit these wheels for the weight conscious comp crawler. 12 Stainless Steel Button Head hardware included. This is the lightest weight 2.2 competition wheel / rim on the market. These wheels really shine in the U4RC genre of rc racing. The plastic combined with the aluminum hex create a basher and racer friendly combo. The plastic wheel will flex on hard impacts while the aluminum hex prevents stripping. The 1.50" width is the factory width or standard for 2.2" rim width. The wider rim allows for the tire to be mounted as it was cast/made, not stretching or forcing the tire into a different profile. Combined with the proper foam set up, these wider wheels provide consistent control and high performance. In general, wider Vanquish Products SLW hubs are used with this rim width, such as the 600, 725, or 850 SLW hub. Since the face of the 6 bolt wheel is nearly flush, there is more back spacing on the rim. The 6 bolt was designed with the nearly flush face to prevent obstacles from catching a wide front rim lip on course. Specifications (with SLW Hubs) (Measured from the end of the hub, not the wheel hex surface) Weight - 13.94gms per wheel (without hub) 225 SLW Hub is inset 12mm from the back of the wheel. 350 SLWHub is inset 9mm from the back of the wheel. 475 SLW Hub is inset 6mm from the back of the wheel. 600 SLW Hub is almost flush to the back of the wheel. 725 SLW Hub is 3mm past the back of the wheel. 850 SLW Hub is 6mm past the back of the wheel **Hubs are not included with these wheels Includes Two (2) 6 Bolt 2.2" diameter, 1.5" wide Delrin Wheels 12 Stainelss Steel Hub Screws. Requires Hubs to mount to wheels Tyres to mount Instalation to your chosen truck Crawler Innovations Part No: CWR5004
