2.2 Torx Beadlock Rings (4)

LURC'sTeam Driver, Clay Carter, requested these rings to match his 1:1 XJ.
They loved the design so much they decided to offer them to everyone.
So we got with Clay, who pinged all his facebook followers for an name, and the "Torx" was born.

Made of high quality aluminum this ring is drilled to match the Axial AX10 2.2" bead lock ring mounting pattern.

What's included:
- Four (4) x 2.2" bead lock rings

No hardware is included with these rings, but is available from Onetencrawlers.

Dimensions:
Bead Diameter - 1.9"
Width - 3mm"
Weight - .38oz

What Locked Up RC Say about the new EasyMount system
Our new Easy Mount wheel system gives you several options for hardware with these rings. You can use standard cap head screws or our Scale Hex bolts. Either way, 6 screws hold the ring to the wheel The rest of the screws thread into the ring and slide into larger holes in our Easy Mount wheels. We suggest M2x7 to m2x8 for the hardware that holds the ring on. The other screws can be M2x8 or shorter.

If you do not have a set of our Easy Mount wheels you can use 18 of our M2x1 "faux" screws to thread into the ring. You can also use any M2 hardware (scale hex bolt or cap head) of your choice and shorten the screws to be flush with the back of the ring once threaded into it. Either way will allow you to mount the ring to several different brands of wheels. The ring still mounts to the wheel with only 6 screws (don't cut these!), making your life much easier when working with foams and weights.

Locked UP RC Part No: 0262